Zero Loss Drains – Reliable condensate management
The industrial standard for reliable condensate management with superior quality, and perhaps the simplest and most cost-effective way to save energy.
The industrial standard for reliable condensate management with superior quality, and perhaps the simplest and most cost-effective way to save energy.
Being the industrial standard for reliable condensate management, the series of LD zero-loss drains permits a controlled drainage of condensate without any compressed air leaks. All LD drains are equipped with an integrated storage tank, inside which a level sensor has been mounted. The sensor is controlled by an intelligent electronic circuit based on an 8-bit microprocessor logic. All drain functions are displayed on the control panel. A test push button is available on the control panel for manual drainage. A built-in filter prevents the solenoid valve from clogging.
In case of trouble, the control circuit unlocks the drainpipes by carrying out a series of forced opening/closing cycles of the solenoid valve. If this is not enough, the malfunction is reported outside by an alarm with potential-free contact to draw the attention of maintenance staff.
The LD drains are produced in 10 different models with different flow rates. All versions are suitable for working with any type of condensate water.
Technical specifications for LD 100 - 204 |
||||||||||
Pneumatech Variant® Specifications ¯ |
LD100 |
LD101 |
LD 101 Compact |
LD 101 L |
LD200 |
LD200 L |
LD202 |
LD202 L |
LD203 |
LD204 |
General characteristics |
|
|||||||||
Drain capacity (l/h) |
1.6 |
4.03 |
3.3 |
5 |
8.07 |
10 |
16.14 |
20 |
85 |
200 |
Compressor capacity (m³/hr) (1) |
180 |
450 |
378 |
450 |
900 |
900 |
1800 |
1800 |
9500 |
18000 |
Compressor capacity (cfm) (1) |
106 |
265 |
222 |
265 |
530 |
530 |
1059 |
1059 |
5591 |
10594 |
Max. power consumption (W) |
10 |
|||||||||
Electrical connection |
Solenoid plug type B – 2+PE |
|||||||||
Potential free contact connection |
M12 connector A-coding 4-pole |
|||||||||
IP Protection |
IP65 |
IP65 |
IP65 |
IP65 |
IP 65 |
IP 65 |
IP 65 |
IP 65 |
IP 65 |
IP 65 |
Physical characteristics |
|
|||||||||
Length (mm) |
136 |
163 |
160 |
163 |
163 |
163 |
163 |
163 |
188 |
247 |
Length (inch) |
5.4 |
6.4 |
6.3 |
6.4 |
6.4 |
6.4 |
6.4 |
6.4 |
7.4 |
9.7 |
Width (mm) |
60 |
69 |
69 |
69 |
69 |
69 |
69 |
69 |
130 |
130 |
Width (inch) |
2.4 |
2.7 |
2.7 |
2.7 |
2.7 |
2.7 |
2.7 |
2.7 |
5.1 |
5.1 |
Height (mm) |
120 |
140 |
120 |
140 |
155 |
155 |
214 |
214 |
230 |
230 |
Height (inch) |
4.7 |
5.5 |
4.7 |
5.5 |
6.1 |
6.1 |
8.4 |
8.4 |
9.1 |
9.1 |
Weight (kg) |
0.42 |
0.6 |
0.5 |
0.6 |
0.7 |
0.7 |
1.2 |
1.2 |
2.8 |
3.45 |
Weight (lbs) |
0.9 |
1.3 |
1.1 |
1.3 |
1.5 |
1.5 |
2.6 |
2.6 |
6.2 |
7.6 |
Connections |
|
|||||||||
Inlet |
G1/2” |
G1/2” |
G1/2” (F) |
G1/2” (F) |
G1/2” (F) |
2 x G1/2” (F) |
G1/2” (F) |
2 x G1/2” (F) |
2 x G1/2” (F) |
2 x G1/2” (F) + 1x G3/4” (F) |
Outlet |
1 x Ø12 |
1 x Ø12 |
1 x Ø12 |
1 x Ø12 |
1 x Ø12 |
1 x Ø12 |
1 x Ø12 |
1 x Ø12 |
1 x Ø12 |
1 x Ø12 |
Features |
|
|||||||||
Test button |
Yes |
|||||||||
Indicative LEDs |
No |
Yes |
||||||||
Potential free alarm |
No |
|
|
|
|
Yes (NC/NO) |
|
|
|
|
