PB 760-3390 S Blower Purge Adsorption Dryers

Technical specifications for PB 760S up to PB 3390S (standard version, PDP -40 ˚C)
Specification	Unit	PB 760 S	PB 1020 S	PB 1330 S	PB 2060 S	PB 2670 S	PB 3390 S
Maximum volume flow at dryer inlet (1) (2)	l/s	360	480	630	970	1260	1600
Maximum volume flow at dryer inlet (1) (2)	m3/hr	1296	1728	2268	3492	4536	5760
Average purge air consumption ⁽³⁾	%	2%	2%	2%	2%	2%	2%
Pressure drop over dryer	barg	0.2	0.16	0.16	0.16	0.16	0.11
Pressure drop over dryer	psig	2.9	2.32	2.32	2.32	2.32	1.6
Inlet and outlet connections	G Thread/DN, acc to DIN2633 PN16	ISO 7-R2" (2)	DN80	DN80	DN100	DN100	DN150
Optional pre & after filter sizes (4)	Fine filter	TF 9 G S	TF 10 G S	TF 11 G S	FF 2 G HE	FF 3 G HE	FF 4 G HE
	Super fine filter	TF 9 C S	TF 10 C S	TF 11 C S	FF 2 C HE	FF 3 C HE	FF 4 C HE
	Dust filter	TF 9 S S	TF 10 S S	TF 11 S S	FF 2 S HE	FF 3 S HE	FF 4 S HE
Mass	kg	1160	1355	1700	2720	3185	4470
Mass	lbs	2557	2987	3748	5997	7022	9855
Height	mm	1829	2558	2612	2702	2681	2488
Height	inch	72.0	100.7	102.8	106.4	105.6	98.0
Width	mm	1028	1024	1024	1175	1175	2373
Width	inch	40.5	40.3	40.3	46.3	46.3	93.4
Length	mm	1100	1764	1884	2359	2472	2809
Length	inch	43.3	69.4	74.2	92.9	97.3	110.6
1. Flow is measured at reference conditions: 1 bara and 20°C at operating pressure of 7 barg, inlet temperature 35°C & std PDP of -40°C at the outlet. 2. Dryer designed for mentioned volume flow, based on average duty of 80%. 2. Specially designed adapters are to be used when no filter is ordered. 4. Filters are sized at reference conditions. Consult the AML of the filters for sizing outside the reference conditions.

Efficient protection against humidity, a common cause of corrosion

Balance between lowest investment cost and lifecycle cost, ideal for high humidity environments; ideal for the semiconductor industry

Advanced energy management for lowest operating costs with high-quality, high-efficient desiccant and counter-current regeneration for optimal energy efficiency