Incorporating high-quality components, PH heatless adsorption dryers provide you with clean, dry air to extend the life of your equipment and products. Heatless adsorption dryers use dry, expanded purge air to remove moisture from the desiccant material.
PH adsorption dryers are -depending on the model - capable of drying air to a pressure dew point (PDP) of either -20°C/-3°F, -40°C/-40°F or even -70°C/-94°F, simply by reducing the flow, thanks to the use of carefully selected molecular sieves The desiccant is housed in a robust extruded aluminum body, which can operate until 16 barg/232 psig (fatigue load). The dryers can be installed vertically and can also be wall-mounted with a specially designed wall-mounting kit (optional).
The controller ensures the lowest operational costs thanks to compressor synchronization and the optional PDP control. LED’s on the controller indicate whether power supply is connected, towers are pressurized and solenoids are functioning properly. It also provides with preventive maintenance information Alarms can also be triggered remote thanks to the available voltage-free contact.