Alternative Line Filter Cartridges

Contact us for a quote!

Grade

G

C

S

D

V

Filter type

General oil coalescing

Fine oil coalescing

General dry dust

Fine dry dust

Oil vapor

Maximum oil carryover (680 F / 200C)

 

0.5 mg/m3

 

0.01 mg/m3

 

 

-

 

 

 

-

 

 

0.003 mg/m3

Pressure loss clean and dry

1 psig

<70 mbar

2 psig

< 140 mbar

1 psig

< 70 mbar

2 psig

< 140 mbar

-

Wet pressure drop

2 psig             < 140 mbar

3 psig              < 200 mbar

-

 

-

-

 

-

-

Maximum temperature

24°F

120°C

248°F

120°C

248°F

120°C

248°F

120°C

122°F

50°C

Guaranteed performance

  • Filter media selected to offer low differential pressure, high oil removal efficiencies and proven continuous performance
  • Performance equal to or superior than the original

Robust design

  • Perforated support cylinders made from corrosion resistant high grade steel, which is twice as strong as galvanized steel
  • Protection layers to protect the glass fiber media from being damaged by the metal cores

Guaranteed interchangeability

  • Designed to fit into the original housing
  • Tested in more than 10.000 filters in the field

Quality control

  • Full traceability by ink jet marking specific codes on every filter element complying with our ISO 9001 manufacturing procedures

FS filter housings are made out of stainless steel with a surface that has been smoothened. The upper and lower filter filter parts are connected by sanitary tri clamp fitting and the side connections are made out of sanitary ISO flanges. As a result, there is no void inside the entire filter housing and there is little to no risk of microorganism contamination. The filter elements are manufactured with silicon to ensure robustness at high operating and sterilization temperatures. All this results in a highly-efficient and exceptionally strong filter.