Adsorption Dryers for clean and dried compressed air
30. juni 2021
Food processing industries, pharmaceutical companies, hospitals, processes involving galvanic treatments have one critical common requirement – very clean and dried compressed air with the help of adsorption dryers. The natural air contains some amount of water vapor and other impurities. Pneumatech’s adsorption dryers with premium desiccant material are energy efficient and offer clean and dried compressed air.
Defining adsorption dryer
Scientifically engineered, the adsorption air dryer is highly efficient and produces quality air that is devoid of pressure drops, contamination build-up waste, and air leaks. The dryer can generate compressed air with a process that lowers the pressure dew point, ranging from -40°C /-40°F to -70°C/-94°F, and meeting the fixed PDP needs year-long and condensation prevention.
Decoding the adsorption process
Adsorption drying is a chemical process. Here, the water vapor is bound to an adsorption material, which either solid or liquid. As per the working principle of the adsorption process, the moist air flows over the hygroscopic material. This material could be silica gel, molecular sieves, or even activated alumina. The air that flows over these hygroscopic materials and air is then dried. In the process, the exchange of water vapor from the moist compressed air passing through the desiccant leads to saturation of adsorbed water in the desiccant. The more desiccant, the higher is the water retained.
Pneumatech’s range of adsorption dryers is designed with 2 drying vessels to consistently regenerate the desiccants to regain the dryer’s drying capacity. The dryer’s first tower dries the incoming compressed air and the second tower regenerates the desiccant’s drying capacity. Both the towers are engineered to switch tasks when one of them is completely regenerated. Our dryers can deliver quality dry air for critical applications offering a pressure dew point as low as -70°C/-94 °F.
Pneumatech’s newly designed and innovative heatless adsorption dryer range – PH 760-3390 HE is equipped with features that offer clean, dry air for extending the life of equipment and products.
Productivity enhancing features:
PDP -40°C/-40°F (standard): activated alumina
PDP -70°C/-94°F and high inlet temperature (option): molecular sieves
Advanced energy management:
PDP control - (Standard with PurelogicTM and optional with DC1 controller)
Purge nozzle optimization (optional)
Standard DC1 controller (PDP control optional)
PurelogicTM (PDP control standard available)
Pneumatic controller (Zero-electricity requirement for installation and no PDP control possible)
Pneumatech’s range of adsorption dryers is designed for a series of industrial applications. They are engineered to provide optimal productivity, efficiency, and protection coupled with low operating costs.
The PH 760 - 3390 HE Welded Heatless Dryers offer a host of benefits:
Innovative open silencer design for lowest possible pressure drop
Reduced purge rate to 16% enhances performance
Large vessel diameter for lowering the risk of crushed desiccant
Guaranteed dry air and optimal energy efficiency
Lowered noise levels
Purelogic™ controller for optimal control and monitoring