Despite all efforts to make dryers, water separators and drains reliable, a failure can never be ruled out. The consequence of condensate water in your pipe network and operations can be dramatic: from corrosion and ice formation to bad product quality and process malfunctioning.
The installation of a Pressure Dew Point (PDP) sensor downstream brings a solution but is often a too large investment. Pneumatech's Water Detector (WD) provides peace-of-mind at an affordable cost. The WD gives an alarm as soon as a 3cl water level is detected. This alarm message is visible, audible and can be routed to a control room thanks to the potential-free contact. The ball valve at the outlet is meant to release water after an alarm situation and is closed during normal operation.
Technical Specifications for WD |
|
General characteristics |
|
First alarm level (cl) |
3 |
Second alarm level (cl) |
6,7 |
Max. power consumption (W) |
10 |
Electrical connection |
Solenoid plug type B - 2+PE |
Potential free contact connection |
M12 connector A-coding 4-pole Both Normally Open (NO) and Normally Closed (NC) possible |
IP Protection |
IP65 |
Physical characteristics |
|
Length (mm / inch) |
160 / 6,3 |
Width (mm / inch) |
69 / 2,71 |
Height (mm / inch) |
116 / 4,5 |
Weight (kg / Lbs) |
0,6 / 1,32 |
Connections |
|
Inlet |
G1/2”, horizontal + vertical |
Outlet |
Ball valve for condensate removal |
Features |
|
Test button |
Yes |
Indicative LEDs |
Yes |
Potential free alarm |
Yes |