Precise Measurement
Accurate dew point monitoring
The PDP Sens range provides precise residual moisture measurement, helping to maintain dry, high-quality air and prevent moisture-related system failures.
Fast & Stable
Quick response & consistency
With a fast adjustment time and condensation-resistant design, the sensor delivers consistent, real-time data, ensuring reliable monitoring in changing conditions.
Easy Integration
Easy installation & connectivity
The PDP Sens range supports Modbus RTU and 4-20 mA output for easy integration into monitoring systems. With pressure resistance up to 350 bar, it fits diverse applications.
General specifications
Technical specifications PDP Sens 1/ PDP Sens 1A/ PDP Sens 2/ PDP Sens 2A |
|
---|---|
Measure range |
-80-20°Ctd, -20-50°Ctd |
Accuracy |
± 1°C to 50--20°Ctd |
Pressure range |
-1-50 bar |
Power supply |
24 VDC (16-30 VDC) |
Protection class |
IP 65 |
EMV |
according to DIN EN 61326-1 |
Operating temp. |
-20-70 °C |
Connection |
M12, 5-pole |
PC connection |
Modbus-RTU interface (RS 485) |
Analog output |
4-20 mA = -80-20°Ctd |
Burden for analog output |
< 500 Ω |
Screw-in thread |
G 1/2“ optional: UNF 5/8“, NPT 1/2“ |
Dimensions |
Ø 30 mm, length approx. 130 mm |
Units service software |
% RH, °Ctd, g/m³, mg/m³, ppm V/V |
Scaling |
Change 4-20 mA |
- Extremely long-term stable
- Analog output 4 - 20 mA for dew point
- Condensation insensitive
- Fast adjustment time
- Pressure resistant up to 350 bar (special version)
- Modbus RTU interface
- Higher resolution of the sensor signal due to improved evaluation electronics
- Sensor diagnosis on site with mobile device or PMH service software
- Readable via Modbus:
Pressure dew point [° Ctd.]
Temperature [° C]
Rel. humidity [% RH]
Abs. humidity [g / m³]
Moisture content [g / m³]
Moisture content V / V [ppmV / V]
Partial vapor pressure [hPa]
Atmospheric dew point [° Ctd.atm]