You are using a browser we do not support any longer. To continue visiting our website, please choose one of the following supported browsers.
Despite all efforts to make dryers, water separators and drains reliable, a failure can never be ruled out. The consequence of condensate water in your pipe network and operations can be dramatic: from corrosion and ice formation to bad product quality and process malfunctioning.
The installation of a Pressure Dew Point (PDP) sensor downstream brings a solution but is often a too large investment. Pneumatech's Water Detector (WD) provides peace-of-mind at an affordable cost. The WD gives an alarm as soon as a 3cl water level is detected. This alarm message is visible, audible and can be routed to a control room thanks to the potential-free contact. The ball valve at the outlet is meant to release water after an alarm situation and is closed during normal operation.
Technical Specifications for WD |
|
General characteristics |
|
First alarm level (cl) |
3 |
Second alarm level (cl) |
6,7 |
Max. power consumption (W) |
10 |
Electrical connection |
Solenoid plug type B - 2+PE |
Potential free contact connection |
M12 connector A-coding 4-pole Both Normally Open (NO) and Normally Closed (NC) possible |
IP Protection |
IP65 |
Physical characteristics |
|
Length (mm / inch) |
160 / 6,3 |
Width (mm / inch) |
69 / 2,71 |
Height (mm / inch) |
116 / 4,5 |
Weight (kg / Lbs) |
0,6 / 1,32 |
Connections |
|
Inlet |
G1/2”, horizontal + vertical |
Outlet |
Ball valve for condensate removal |
Features |
|
Test button |
Yes |
Indicative LEDs |
Yes |
Potential free alarm |
Yes |
Contact us
Pneumatech, Unit 5, Westway 21, Chesford Grange, Warrington, WA1 4SZ