Calibration of Dew Point and Flow Sensors

We recommend that you calibrate your dew point and flow sensors regularly. High precision reference measuring instruments grant an accuracy of up to 0.1 °C dew point.

Dew point and flow sensors

Thanks to the digital data transmission, only the dew oint sensor has to be calibrated. The disply devices remain wired on site.

Calibration range

From - 80 - 20 °Ctd

Accuracy of the DKD reference

0.1 °Ctd

Control and calibration set

Control and calibration set guarantee a defined humidity by means of a satured saline solution. The control and calibration set is screwed onto the dew point sensors and thus enables an easy and low-priced possibility for on-site control and calibration down to - 20 °C dew point.

Explore our range of Measurement Equipment

Chart Recorders

If you want to know what’s going on in your compressed air system at any time, then you should invest in a chart recorder. It shows the measurement data of the various sensors on a screen and lets you monitor all parameters at a glance. In addition, you have the option of analyzing the information to help you find the most energy efficient solution for your application.

Dew Point Sensors

Knowing the dew point of their compressed air allows users to dry it more efficiently while ensuring that it does not contain too much moisture. Dew sensors play an important role in this regard. They allow compressed air users to always keep an eye on the air’s dew point and to take the necessary steps to control it – all while only drying it as much as needed. And that can save a lot of energy.

Leak Detectors

Leaks in compressed air systems may be tiny, but they can have huge effect on a compressor’s energy consumption. In fact, by eliminating leaks, energy costs can be reduced by up to 30%. To make sure that no air and energy is wasted, a leak detector helps find and eliminate these leaks.

Flow Sensors

To ensure that a compressed air system functions optimally, the proper amount of air needs to reach every part of it. However, to preserve energy, you also don’t want to supply more air than is needed. That’s where a flow sensor is highly useful. It not only makes sure that enough air gets to where it has to go but also that you are not wasting energy.

Screen shot measurement Equipement Software

Measurement Equipment Software

PMH Basic data evaluation in graphic form - import your measurements via USB stick or Ethernet. Easy to read visualization in color

View all Measurement Equipment