Chart Recorder providing high end data to efficiently run your compressor room

From recording of the measured data, indication on a big color screen, alerting, storage up to remote read-out via webserver, it’s all possible with Check Box S6 intelligent Chart Recorders. By means of webserver software alarms can be sent via SMS or e-mail. All measured values and measured curves exceeding thresholds are indicated. The curve progressions from the beginning of the measurement can be viewed with a swipe. Daily/weekly/monthly reports with costs and counter readings for each consumption sensor complete the sophisticated system concept.

The big difference compared with ordinary paperless chart recorders, lies in the easy initiation and evaluation of the measured data. All sensors are identified directly and powered by Check Box S6. At 12 freely assignable sensor inputs all our sensors can be connected as well as any optional third-party sensors and meters with the following signal outputs.

Technical data Check Box S6
Dimensions of housing	280 x 170 x 90 mm, IP 65
Connections	18 x PG 12 for sensors and supply
Version panel mounting	Cutout panel 250 x 156 mm
Weight	7.3 Kg
Material	Die cast metal, front screen polyester
Sensor inputs	4/8/12 sensor inputs for analogue and digital sensors freely allocatable. See options Digital PMH sensors for dew point and consumption with SDI interface FA/VA series, digital third-party sensors RS 485 / Modbus RTU, other bus systems realizable on request. Analogue PMH Sensors for pressure, temperature, clamp-on ammeters pre-configured. Analogue third-party sensors 0/4-20 mA, 0-1/10/30V, pulse, Pt 100 / Pt 1000, KTY
Power supply for sensors	24 VDC, max. 130 mA per sensor, integrated mains unit max. 24 VDC, 25 W. In case of version 8/12 sensor inputs, 2 integrated mains units each max. 24 VDC, 25 W.
Interfaces	USB stick, Ethernet / RS 485 Modbus RTU / TCP, SDI other bus systems on request, WEB server optionally
Outputs	4 relays (changeover contact 230 VAC, 6 A), alarm management, relays freely programmable, collective alarm Analogue otuput, pulse in case of sensors with own signal output looped, like e.g. VA/FA series
Memory card	Memory size 4 GB SD memory card standard
Power supply	100-240 VAC / 50-60 Hz, special version 24 VDC
Color screen	7“ touch panel TFT transmissive, graphics, curves, statistics
Accuracy	see sensor specifications
Operating temperature	0-50°C
Storage temperature	-20-70°C
Optionally	Webserver
Optionally	Option „energy and flow report“ statistics, daily/weekly/monthly report

Measurement Equipment

Compressed air and the industrial gases you produce from this air are valuable products. Efficiency especially is a determining factor, as energy accounts for up to 80% of the total cost of a compressed air system. With Pneumatech’s proven, innovative measurement technologies, critical data points in an air and/or gas system can be recorded and analyzed so you can optimize its performance.

Chart Recorders

If you want to know what’s going on in your compressed air system at any time, then you should invest in a chart recorder. It shows the measurement data of the various sensors on a screen and lets you monitor all parameters at a glance. In addition, you have the option of analyzing the information to help you find the most energy efficient solution for your application.

Dew Point Sensors

Knowing the dew point of their compressed air allows users to dry it more efficiently while ensuring that it does not contain too much moisture. Dew sensors play an important role in this regard. They allow compressed air users to always keep an eye on the air’s dew point and to take the necessary steps to control it – all while only drying it as much as needed. And that can save a lot of energy.

Leak Detectors

Leaks in compressed air systems may be tiny, but they can have huge effect on a compressor’s energy consumption. In fact, by eliminating leaks, energy costs can be reduced by up to 30%. To make sure that no air and energy is wasted, a leak detector helps find and eliminate these leaks.

Flow Sensors

To ensure that a compressed air system functions optimally, the proper amount of air needs to reach every part of it. However, to preserve energy, you also don’t want to supply more air than is needed. That’s where a flow sensor is highly useful. It not only makes sure that enough air gets to where it has to go but also that you are not wasting energy.

See all Measurement Equipment

Check Box S 6 Chart Recorders

Clear layout

Versatile

Suitable for industrial applications

Data available on the web

Intelligent

Mathematical function for internal calculations

Totalizer function for analogue signals

Saves time and costs during installation