M POU 2-16 Membrane Dryers

Contact our membrane dryer specialist

No power source needed

Simple yet eco-friendly technology

  • No desiccants or refrigerants used for drying
  • No condensate drains
  • Guaranteed performance

  • High water vapor selectivity thanks to non-porous membrane
  • No penetration of gases other than moisture
  • Maintenance free

  • No wear and tear of any mechanical or electrical part
  • No need of replacement of any component
  • Easy to transport and install

  • Built-in purging circuits
  • Easy and simple dew point adjustments thanks to the purge low control
  • Membrane dryers for small compressed air needs

    Pneumatech offers an easy-to-use and simple drying solution for small compressed air needs. Pneumatech point-of-use membrane dryer does not require any power source, is compact and easy to install. This makes the dryer suitable for various smaller compressed air applications where a higher degree of dehumidification is required, such as laser machining tools, precision measuring equipment, gas analyzers and small gas generators.

    The pressure dew point achieved by membrane dryers is dependent on the inlet temperature of the compressed air; but can go down to -40°C/-40°F. This is achieved by a hollow-fiber membrane, where moisture can diffuse through the fine pores of the fiber bundles. When differences in moisture concentration arise between the inside and outside of a fiber membrane, moisture is transferred through the membrane surface to equalize

    the moisture concentration on both sides of the membrane. Part of the dry air is used as purge air in order to remove the moisture from the incoming wet air.

    Technical specifications for M POU 2-16

    Product
    Specification

    Unit M POU2 M POU 3 M POU 5 M POU 11 M POU 16
    Nominal volume flow
    at dryer inlet (1)
    l/s 0.83 1.33 2.50 5.00 7.50
    m³/hr 3 4.8 9 18 27
    Supply Gas
    Inlet and outlet connections
    Inlet (G/NPT) 1/8" 1/8" 1/4" 3/8" 3/8"
    Outlet (G/NPT) 1/4" 1/4" 1/4" 1/4" 1/4"
    Weight kg 0.27 0.27 0.34 0.68 0.72
    lbs 0.59 0.6 0.76 1.5 1.59
    Dimensions Width mm 61 61 70 100 100
    inch 2.4 2.4 2.8 3.9 3.9
    Height mm 112 112 153 200 200
    inch 4.4 4.4 6.0 7.9 7.9
    Length mm 31 31 40 50 50
    inch 1.2 1.2 1.6 2.0 2.0