FAQ

CDF Mechanical Float Drains

Contact us for more information

No loss of compressed air

Automatic controlled drainage of condensate without any compressed air leak

Plug-and-play solution

  • No power supply needed
  • No programming or calibration
  • Guaranteed reliability

  • Large cross-section openings
  • Well-proven, rugged aluminium design
  • Provided with a separate manual drain to depressurize the pressure aluminium housing and allow manual discharge for venting or draining
  • Pneumatech’s CDF drain discharges the condensate automatically and without compressed air losses up to 10 bar. 

    The condensate is accumulated in the aluminium receiver (pressureproof housing) and as soon as the maximum level has reached, the condensate will be drained out without any air loss. The direct acting valve is piloting by a precise level float sensor that ensures reliability and efficiency. In its depressurized state the valve is closed (NC design).

    The drain is equipped with an integrated venting function, which prevents the risk of possible air slots. The CDF drain has a well-proven, rugged aluminium design with threated connections at inlet and outlet.

    Condensate Management

    Condensate is the inevitable by-product of compressing air. In the case of oil-injected air compressors, this condensate can contain both oil and water. Pneumatech condensate management solutions remove water from your air system and separate oil from water to help you dispose of it legally, safely, and environmentally friendly.

    Condensate Management

    Condensate is the inevitable by-product of compressing air. In the case of oil-injected air compressors, this condensate can contain both oil and water. Pneumatech condensate management solutions remove water from your air system and separate oil from water to help you dispose of it legally, safely, and environmentally friendly.