You are using a browser we do not support any longer. To continue visiting our website, please choose one of the following supported browsers.
Pneumatech offers an easy-to-use and simple drying solution for small compressed air needs. Pneumatech point-of-use membrane dryer does not require any power source, is compact and easy to install. This makes the dryer suitable for various smaller compressed air applications where a higher degree of dehumidification is required, such as laser machining tools, precision measuring equipment, gas analyzers and small gas generators.
The pressure dew point achieved by membrane dryers is dependent on the inlet temperature of the compressed air; but can go down to -40°C/-40°F. This is achieved by a hollow-fiber membrane, where moisture can diffuse through the fine pores of the fiber bundles. When differences in moisture concentration arise between the inside and outside of a fiber membrane, moisture is transferred through the membrane surface to equalize
the moisture concentration on both sides of the membrane. Part of the dry air is used as purge air in order to remove the moisture from the incoming wet air.
Technical specifications for M POU 2-16 | |||||||
Product |
Unit | M POU2 | M POU 3 | M POU 5 | M POU 11 | M POU 16 | |
Nominal volume flow at dryer inlet (1) |
l/s | 0.83 | 1.33 | 2.50 | 5.00 | 7.50 | |
m³/hr | 3 | 4.8 | 9 | 18 | 27 | ||
Supply Gas Inlet and outlet connections |
Inlet (G/NPT) | 1/8" | 1/8" | 1/4" | 3/8" | 3/8" | |
Outlet (G/NPT) | 1/4" | 1/4" | 1/4" | 1/4" | 1/4" | ||
Weight | kg | 0.27 | 0.27 | 0.34 | 0.68 | 0.72 | |
lbs | 0.59 | 0.6 | 0.76 | 1.5 | 1.59 | ||
Dimensions | Width | mm | 61 | 61 | 70 | 100 | 100 |
inch | 2.4 | 2.4 | 2.8 | 3.9 | 3.9 | ||
Height | mm | 112 | 112 | 153 | 200 | 200 | |
inch | 4.4 | 4.4 | 6.0 | 7.9 | 7.9 | ||
Length | mm | 31 | 31 | 40 | 50 | 50 | |
inch | 1.2 | 1.2 | 1.6 | 2.0 | 2.0 |
Head Office 19F Triton Drive Rosedale, Auckland 0632, New Zealand