PH 2-45 HE Extruded Profile Heatless Adsorption Dryers

Contact us for a quote!

Advanced energy management for lowest operating costs

High-quality, high-efficient desiccant

Spring-loaded cartridges minimize the risk of crushed desiccant

Counter-current regeneration for optimal energy efficiency

Designed for transportability and mountability

Inlet and outlet can be reversed

Low noise levels while purging

High reliability and robust design

Incorporating high-quality components, PH heatless adsorption dryers provide you with clean, dry air to extend the life of your equipment  and  products.  Heatless  adsorption  dryers  use  dry, expanded purge air to remove moisture from the desiccant material.

PH 2-45 HE adsorption dryers are capable of drying air to a PDP of -70°C/-94°F, simply by reducing the flow, thanks to the use of carefully selected molecular sieves. The desiccant is housed in a robust extruded aluminum body, which can operate until 16  barg/232  psig  (fatigue  load). The  dryers  are  equipped  with a mounted pre-filter and an integrated after-filter as standard, can be installed vertically and can also be wall-mounted with a specially designed wall-mounting kit (optional).

The controller ensures the lowest operational costs thanks to compressor synchronization and the optional PDP control. LED’s on the controller indicate whether power supply is connected, towers  are  pressurized  and  solenoids  are  functioning  properly.  It also provides with preventive maintenance information. Alarms can also be triggered remote thanks to the available voltage-free contact.

Technical specifications for PH 2 HE up to PH 45 HE (standard version, PDP -40 ˚C)

Specifications

Unit

PH 2 HE

PH 4 HE

PH 6 HE

PH 11 HE

PH 15 HE

PH 20 HE

PH 25 HE

PH 35 HE

PH 45 HE

 

Nominal volume flow at

l/s

1

2

3

5

7

10

12

17

22

dryer inlet (1)

m3/hr

4

7

11

18

25

36

43

61

79

Average purge air consumption

%

18

18

18

18

18

18

18

18

18

 

Inlet and outlet connections

G

1/4"

 

1/4"

1/4"

 

1/4"

1/4"

 

1/4"

1/2"

 

1/2"

1/2"

 

1/2"

1/2"

 

1/2"

1/2"

 

1/2"

1/2"

 

1/2"

1/2"

 

1/2"

NPT

 

Pressure drop at max. flow

barg

0.012

0.075

0.185

0.01

0.04

0.075

0.125

0.21

0.34

psig

0.17

1.09

2.68

0.15

0.58

1.09

1.81

3.05

4.93

Included pre-filter size

Super fine filter

Mini 3 C HE

Mini 3 C HE

Mini 3 C HE

TF 1 C HE

TF 1 C HE

TF 1 C HE

PH 2 C HE

PH 2 C HE

PH 2 C HE

 

 

Mass

kg

7

9

11

19

22

25

29

35

44

lbs

15.5

19.8

24.2

41.9

48.5

55.1

63.9

77.1

97

 

 

Height

mm

540

 

21.2

720

 

28.3

855

 

33.6

640

 

25.1

725

 

28.5

875

 

34.4

1015

 

39.9

1270

 

50

1505

 

59.2

inch

 

 

Width

mm

197

197

197

320

320

320

320

320

320

inch

7.7

7.7

7.7

12.5

12.5

12.5

12.5

12.5

12.5

 

 

Length

mm

106

 

4.1

106

 

4.1

106

 

4.1

149

 

5.8

149

 

5.8

149

 

5.8

149

 

5.8

149

 

5.8

149

 

5.8