FAQ

Check Box S 6 Chart Recorders

Contact us for more information

Clear layout

7” color screen with touch panel

Versatile

Up to 12 optional sensors can be connected

Suitable for industrial applications

Metal housing IP 65 or panel mounting

Data available on the web

Network-compatible and remote transmission via webserver

Intelligent

Daily/weekly/monthly reports

Mathematical function for internal calculations

Totalizer function for analogue signals

Saves time and costs during installation

Chart Recorder providing high end data to efficiently run your compressor room

From recording of the measured data, indication on a big color screen, alerting, storage up to remote read-out via webserver, it’s all possible with Check Box S6 intelligent Chart Recorders. By means of webserver software alarms can be sent via SMS or e-mail. All measured values and measured curves exceeding thresholds are indicated. The curve progressions from the beginning of the measurement can be viewed with a swipe. Daily/weekly/monthly reports with costs and counter readings for each consumption sensor complete the sophisticated system concept.

The big difference compared with ordinary paperless chart recorders, lies in the easy initiation and evaluation of the measured data. All sensors are identified directly and powered by Check Box S6. At 12 freely assignable sensor inputs all our sensors can be connected as well as any optional third-party sensors and meters with the following signal outputs.

Technical data Check Box S6

Dimensions of housing

280 x 170 x 90 mm, IP 65

Connections

18 x PG 12 for sensors and supply

Version panel mounting

Cutout panel 250 x 156 mm

Weight

7.3 Kg

Material

Die cast metal, front screen polyester

Sensor inputs

4/8/12 sensor inputs for analogue and digital sensors freely allocatable. See options

Digital PMH sensors for dew point and consumption with SDI interface FA/VA series, digital third-party sensors RS 485 / Modbus RTU, other bus systems realizable on request.

Analogue PMH Sensors for pressure, temperature, clamp-on ammeters pre-configured. Analogue third-party sensors 0/4-20 mA, 0-1/10/30V, pulse, Pt 100 / Pt 1000, KTY

Power supply for sensors

24 VDC, max. 130 mA per sensor, integrated mains unit max. 24 VDC, 25 W. In case of version 8/12 sensor inputs,     2 integrated mains units each max. 24 VDC, 25 W.

Interfaces

USB stick, Ethernet / RS 485 Modbus RTU / TCP, SDI other bus systems on request, WEB server optionally

Outputs

4 relays (changeover contact 230 VAC, 6 A), alarm management, relays freely programmable, collective alarm Analogue otuput, pulse in case of sensors with own signal output looped, like e.g. VA/FA series

Memory card

Memory size 4 GB SD memory card standard

Power supply

100-240 VAC / 50-60 Hz, special version 24 VDC

Color screen

7“ touch panel TFT transmissive, graphics, curves, statistics

Accuracy

see sensor specifications

Operating temperature

0-50°C

Storage temperature

-20-70°C

Optionally

Webserver

Optionally

Option „energy and flow report“ statistics, daily/weekly/monthly report

Measurement Equipment

Compressed air and the industrial gases you produce from this air are valuable products. Efficiency especially is a determining factor, as energy accounts for up to 80% of the total cost of a compressed air system. With Pneumatech’s proven, innovative measurement technologies, critical data points in an air and/or gas system can be recorded and analyzed so you can optimize its performance.