FS Sterile Filters

Pneumatech’s FS filters are designed for compressed air and gas applications that need to be free from microbiological contamination, and can thus be sterilized regularly.

Enhanced high-grade stainless steel filter housing

Advanced filter cartridge design

100% integrity tested (DOP test)

Approved for food applications

FS filter housings are made out of stainless steel with a surface that has been smoothened. The upper and lower filter filter parts are connected by sanitary tri clamp fitting and the side connections are made out of sanitary ISO flanges. As a result, there is no void inside the entire filter housing and there is little to no risk of microorganism contamination. The filter elements are manufactured with silicon to ensure robustness at high operating and sterilization temperatures. All this results in a highly-efficient and exceptionally strong filter.

Technical specifications for FSI
Filter Model	Pipe Size	Flow Rate		Dimensions				Weight (kg) Approx.
	G/NPT	Nm³/h	SCFM	H (mm)	W (mm)	D (mm)	ø
FSI 1	1/4"	75	44	225	116	76.1	1/8"	1.7
FSI 2	3/8"	105	62	251	120	76.1	1/8"	1.9
FSI 3	1/2"	150	88	253	125	76.1	1/8"	1.9
FSI 4	3/4"	225	132	281	125	76.1	1/8"	2.0
FSI 5	1"	315	185	290	136	88.9	1/8"	2.6
FSI 6	1 1/4"	420	247	357	155	88.9	1/8"	3.0
FSI 7	1 1/2"	600	353	408	179	114.3	1/4"	4.3
FSI 8	2"	900	530	476	179	114.3	1/4"	4.8
FSI 9	2"	1260	742	602	180	114.3	1/4"	5.3
FSI 10	2 1/2"	1680	989	762	224	139.7	1/4"	9.0
FSI 11	3"	2400	1413	1030	224	139.7	1/4"	10.8
FSI 12	3"	3600	2119	1035	238	154	1/4"	16.2

Compressed Air Filters

Compressed air can contain a wide range of contaminants, from oil droplets to sand and dust particles. However small, these particles can cause downstream equipment malfunctions, product contamination, and other quality issues. Depending on your application, you may need compressed air filters to prevent air system quality, reliability, and efficiency problems. Pneumatech offers various types of compressed air filters to remove any type of contaminant.