PH 55-550 HE Extruded Profile Heatless Adsorption Dryers

Contact us for a quote!

Advanced energy management for lowest operating costs

Best-in-class performance thanks to unique valve and exhaust design

Low noise levels during purge and blow-off

High-quality, high-efficient desiccant

Spring-loaded desiccant minimizes the risk of crushing

Counter-current regeneration for optimal energy efficiency

Designed for transportability and mountability

Desiccant bags for easy service from the top

Dessicant dryers with a stable PDP for low investment costs

Incorporating high-quality components, PH heatless adsorption dryers provide you with clean, dry air to extend the life of your equipment  and  products.  Heatless  adsorption  dryers  use  dry, expanded purge air to remove moisture from the desiccant material.

PH 2-45 HE adsorption dryers are capable of drying air to a PDP of -70°C/-94°F, simply by reducing the flow, thanks to the use of carefully selected molecular sieves. The desiccant is housed in a robust extruded aluminum body, which can operate until 16  barg/232  psig  (fatigue  load). The  dryers  are  equipped  with a mounted pre-filter and an integrated after-filter as standard,

 

can be installed vertically and can also be wall-mounted with a specially designed wall-mounting kit (optional).

The controller ensures the lowest operational costs thanks to compressor synchronization and the optional PDP control. LED’s on the controller indicate whether power supply is connected, towers  are  pressurized  and  solenoids  are  functioning  properly. It also provides with preventive maintenance information. Alarms can also be triggered remote thanks to the available voltage-free contact.

Technical specifications for PH 55 HE up to PH 550 HE (standard version, PDP -40 ˚C)

 

Specification

 

Unit

PH 55 HE

PH 75 HE

PH 95 HE

PH 120 HE

PH 140 HE

PH 190 HE

PH 230 HE

PH 275 HE

PH 350 HE

PH 420 HE

PH 550 HE

 

Nominal volume flow

l/s

25

35

45

55

65

90

110

130

165

195

260

at dryer inlet (1)

90

126

162

198

234

324

396

468

594

702

936

m3/hr

Regeneration air consumption average at max. flow

 

%

 

16.5

 

16.5

 

16.5

 

16

 

16

 

16.5

 

16.5

 

16.5

 

16.5

 

17

 

17

 

Connection inlet/outlet

G

1/2"

1"

1"

1"

1 1/2"

1 1/2"

1 1/2"

1 1/2"

1 1/2"

1 1/2"

2"

NPT

 

1/2"

1"

1"

1"

1 1/2"

1 1/2"

1 1/2"

1 1/2"

1 1/2"

1 1/2"

2"

 

Pressure drop at max. flow

barg

0.031

0.065

0.114

0.18

0.278

0.114

0.18

0.278

0.18

0.278

0.278

psig

0.45

0.94

1.65

2.61

4.03

1.65

2.61

4.03

2.61

4.03

4.03

 

Included pre & after filter size

Super fine filter

TF 3 C HE

 

TF 3 S HE

TF 4 C HE

 

TF 4 S HE

TF 5 C HE

 

TF 5 S HE

TF 5 C HE

 

TF 5 S HE

TF 6 C HE

 

TF 6 S HE

TF 6 C HE

 

TF 6 S HE

TF 6 C HE

 

TF 6 S HE

TF 7 C HE

 

TF 7 S HE

TF 8 C HE

 

TF 8 S HE

TF 8 C HE

 

TF 8 S HE

TF 9 C HE

 

TF 9 S HE

Dust filter

 

Height

mm

1205

1205

1495

1495

1835

1495

1495

1835

1495

1835

1835

inch

47.4

47.4

58.9

58.9

72.2

58.9

58.9

72.2

58.9

72.2

72.2

 

Width

mm

807

 

31.8

827

 

32.6

847

 

33.3

847

 

33.3

877

 

34.5

907

 

35.7

906

 

35.7

907

 

35.7

907

 

35.7

907

 

35.7

985

 

38.8

inch

 

Length

mm

394

394

394

394

394

564

564

564

734

734

929

inch

15.5

15.5

15.5

15.5

15.5

22.2

22.2

22.2

28.9

28.9

36.6

 

Mass

kg

100

 

220.5

109

 

240.3

128

 

282.2

140

 

308.6

165

 

363.8

217

 

478.4

234

 

515.9

276

 

608.5

331

 

729.7

389

 

857.6

500

 

1102.3