GAS MIXER FOR LASER CUTTING

PPNG MX

The PPNG MX is a gas mixer designed specifically for laser cutting. By blending nitrogen and oxygen, it gives you the benefits of both assist gases without their downsides. That means high cutting speed and excellent finish and edge quality, even on thicker material.

A cleaner cut

Superior cutting quality

Mixing nitrogen with oxygen delivers a smooth finish and clean edges. It eliminates the burr caused by pure nitrogen and the oxide layer left by oxygen-only.

Get more done

Faster production

Laser cutting with a nitrogen-oxygen mix is more than 5 times faster than using just oxygen. For aluminum, cutting speed increases by up to 40%.

Reliable performance

Stable gas mix

The PPNG MX ensures a stable assist gas mix for repeatable cutting quality. Its built-in bypass lets you switch between gas types without stopping production.

PPNG MX Gas Mixer For Laser Cutting

The PPNG MX is a high-performance precision gas mixer engineered for the demands of laser cutting applications. It blends nitrogen and oxygen at the optimal ratio to combine the advantages of both assist gases – faster cutting and superior edge quality – while minimizing their drawbacks.

Compared to pure oxygen, a nitrogen-oxygen mix can increase cutting speeds by up to 5× on mild steel. For aluminum, the PPNG MX can boost speed by over 40%, while also delivering smoother surface finishes.

Pure nitrogen helps avoid oxidation but can produce significant burr on thicker materials. Oxygen cuts cleaner but leaves behind an oxide layer that requires additional processing. The PPNG MX eliminates these trade-offs by providing a stable gas mix that enables smooth, weld-ready edges with minimal burr and no oxide residue, reducing post-processing and increasing overall productivity.

Designed for 24/7 operation and delivered plug-and-play, the PPNG MX is easy to install and use, occupies minimal floor space, and ensures a consistent gas supply to your laser system.

Precision gas mixing for laser cutting

The PPNG MX enables precise and reliable mixing of nitrogen and oxygen to create the optimal assist gas for laser cutting applications. By delivering the right gas composition at the right pressure, it ensures stable cutting conditions, improved edge quality, and consistent results across a wide range of materials and thicknesses. Designed for seamless integration with high-pressure nitrogen sources, the PPNG MX provides dependable performance for both continuous production and demanding laser cutting environments.

Key Features

High-performance assist gas mixing

The PPNG MX is designed to work with your nitrogen and oxygen sources, including Pneumatech’s PPNG NX generator. The PPNG NX supplies high-pressure, high-quality nitrogen to the mixer, which then adds the right volume of oxygen. The result is a consistent, high-performance assist gas mix delivered directly to your laser.

The PPNG MX comes in two versions:

PPNG MX HE (Automatic)

Controller with automatic mix selection
Mixed/non-mixed gas bypass
Single-phase power, dual frequency

PPNG MX (Manual)

Simple mechanical dial
No power required

Vantaggi della generazione di azoto in loco

State pensando di passare dall'acquisto di azoto in bottiglia alla generazione di azoto in loco? La scelta è chiara: dovresti assolutamente farlo! La generazione di gas in loco offre numerosi vantaggi, tra cui costi ridotti, controllo preciso della purezza, minori emissioni di trasporto, maggiore sicurezza ed eliminazione delle sfide logistiche. In ogni aspetto, la generazione di azoto in loco si rivela la soluzione più efficace ed efficiente. Contattate i nostri esperti per saperne di più su come questa transizione può essere vantaggiosa per le vostre operazioni.

Contatta subito i nostri esperti di azoto

General specifications

Nitrogen purity (%)

99.5

Nitrogen outlet purity (%)

79-99.5

Outlet pressures available (barg)

31

PPNG MX product brochure

Download

Filename: Pneumatech_PPNG_MX_Sales_Leaflet_ENG_6999901160_LR.pdf
Dimensione: 940 KB
Formato: pdf

Download

Pressure and mix designed for laser cutting
Accurate and stable mixed gas supply
Less burr than cutting with nitrogen alone
Eliminates the oxide layer oxygen-only cutting can cause
More than 5 times faster cutting than with oxygen
Paint- and weld-ready edges
No mixing vessel required
Plug-and-play setup
Fits easily into tight laser cutting workshops
Manual and automatic version available
Bypass on automatic version lets you switch between mixed and unmixed gas
Minimal maintenance requirements

Nitrogen outlet purity: 79-99.5%
Nitrogen purity up to 99.5%
Outlet pressures available: up to 31 barg
Power supply:
- Manual version: No power required
- Automatic version: 230V/50Hz or 110V/60Hz
IEC/UL certified

Oxygen room analyzer

Contattaci

Avete domande o siete curiosi di sapere come i nostri generatori di azoto possono potenziare le vostre operazioni? Mettiti in contatto con noi ! Il nostro team è pronto a fornire informazioni e supporto per aiutarvi a ottimizzare i vostri processi con la nostra tecnologia all'avanguardia per l'azoto. Trasformiamo insieme le vostre operazioni!

Contatta subito i nostri esperti di azoto

PPNG MX

Superior cutting quality

Faster production