PB 760-3390 S Blower Purge Adsorption Dryers

Contact us for a quote!

Advanced energy management for lowest operating costs

High-quality, high-efficiency desiccant, selected for the right application

Minimal risk of crushed desiccant thanks to the sonic nozzle and the large vessel diameters

Counter-current regeneration for optimal energy efficiency and guaranteed dry air

High-efficiency heaters, designed for maximum lifetime and minimal risk

Compact, efficient and reliable side-channel centrifugal blower

Designed for transportability

Optimal control and monitoring thanks to the Purelogic™ controller

Blower Purge Desiccant Dryer for compressed air and low dew points

PB dryers use heated blower purge air to remove moisture from the desiccant material and have therefore no purge loss during regeneration. The Zero Purge variants reduce life cycle costs even further by also eliminating purge loss during cooling. The cooling phase happens in a closed loop, hereby minimizing the performance impact at high ambient temperature and relative humidity.

Technical specifications for PB 210 HE up to PB 635 HE (ZP) (standard version, PDP -40˚C)

Specification

Unit

PB 210HE

PB 320 HE

PB 390 HE

PB 530 HE

PB 635 HE

PB 700 HE

PB 850 HE

PB 1150 HE

PB 1800 HE

PB 2350 HE

PB 2950 HE

PB 3800 HE

PB 4650 HE

PB 6350 HE

Cooling Mode

-

Purge

Purge

Purge

Purge

Purge

 

Purge

 

Purge

 

Purge

 

Purge

 

Purge

 

Purge

 

Purge

 

Purge

 

Purge

Nominal volume flow at dryer inlet (1)

l/s

100

150

185

250

300

330

400

550

850

1100

1400

1800

2200

3000

m3/hr

360

540

666

900

1080

1188

1440

1980

3060

3960

5040

6480

7920

10800

Purge air consumption average

%

2

2

2

2

2

 

2%

 

2%

 

2%

 

2%

 

2%

 

2%

 

2%

 

2%

 

2%

Pressure drop over dryer

barg

0.2

0.2

0.2

0.2

0.2

0.12

0.12

0.12

0.12

0.12

0.1

0.16

0.22

0.18

psig

2.90

2.90

2.90

2.90

2.90

1.74

1.74

1.74

1.74

1.74

1.45

2.32

3.19

2.61

Inlet and outlet connections

G/NPT

1 ½”

 

 

1 ½”

 

1 ½”

 

 

2”

 

 

2”

 

 

-


- - - - - - - -

DN, acc. to DIN2633 PN16

- - - - - 80

80

80

100

100

150

150

150

200

 

Included pre and after filters

Fine filter

TF 6 G HE

TF 7 G HE

TF 8 G HE

TF 9 G HE

TF 9 G HE

PMH G 1529

PMH G 1529

FF 1 G HE

FF 2 G HE

FF 3 G HE

FF 4 G HE

FF 5 G HE

FF 6 G HE

FF 7 G HE

Super fine filter

TF 6 C HE

TF 7 C HE

TF 8 C HE

TF 9 C HE

TF 9 C HE

PMH C 1529

PMH C 1529

FF 1 C HE

FF 2 C HE

FF 3 C HE

FF 4 C HE

FF 5 C HE

FF 6 C HE

FF 7 C HE

Dust filter

TF 6 S HE

TF 7 S HE

TF 8 S HE

TF 9 S HE

TF 9 S HE

PMH S 1529

PMH S 1529

FF 1 S HE

FF 2 S HE

FF 3 S HE

FF 4 S HE

FF 5 S HE

FF 6 S HE

FF 7 S HE

 

Height

mm

1720

 

67.7

1770

 

69.7

1770

 

69.7

1816

 

71.5

1853

 

73.0

1190

2624

1300

2866

1620

3571

2600

5732

3040

6702

4200

9259

4800

10582

5750

12677

7800

17196

inch

 

Width

mm

770

870

870

955

1010

2558

2558

2612

2702

2681

2488

2548

2548

2793

inch

30.3

34.3

34.3

37.6

39.8

100.7

100.7

102.8

106.4

105.6

98.0

100.3

100.3

110.0

 

Length

mm

1250

 

49.2

1300

 

51.2

1300

 

51.2

1345

 

53.0

1425

 

56.1

1024

40.3

1024

40.3

1024

40.3

1175

46.3

1175

46.3

2373

93.4

2400

94.5

2792

109.9

2834

111.6

inch

 

Mass

kg

640

680

710

775

820

1764

1764

1884

2359

2472

2809

2830

2993

3385

lbs

1411

1499

1565

1709

1808

69.4

69.4

74.2

92.9

97.3

110.6

111.4

117.8

133.3