Reliable performance
Effortless regulatory compliance
The ECOBOX 2-4 effectively reduces oil concentrations in condensate to below 15 ppm, making it simple for businesses to meet even the most stringent environmental regulations.
Energy-efficient
Cost-effective condensate management
Say goodbye to costly external condensate treatment services. The ECOBOX offers an in-house solution that lowers operational expenses while delivering reliable performance.
User-friendly
Compact & convenient
With its lightweight and space-saving design, the ECOBOX fits seamlessly into small compressor setups, ensuring easy installation without compromising on efficiency.
General specifications
Max. capacity - mild climate (m3/h)
190 - 1400
Inlet connection (inch)
4 x 1/2"
Service life filter (hrs)
4000
Model |
Max. capacity – mild climate (m3/h)1 |
Inlet connection (mm) |
Service life filter (hrs)2 |
---|---|---|---|
ECOBOX 2 |
190 |
4 x 1/2" |
4000 |
ECOBOX 3 |
570 |
4 x 1/2" |
4000 |
ECOBOX 4 |
1400 |
4 x 1/2" |
4000 |
1. In tropical climates (high ambient temperatures and humidity levels), the air generally contains more water vapor. The extra condensate, generated during the compression and cooling process of the air, shortens the contact time in the device, leaving less time for the media to absorb the oil. Climatic conditions used in the table above are defines as follows: a. Cold climate conditions: average ambient temperature of 20°C/ 68°F- relative humidity of 50 % b. Normal climate conditions: average ambient temperature of 25°C/ 75°F - relative humidity of 50% c. Hot climate conditions: average ambient temperature of 35°/ 95°F - relative humidity of 70%
2. Pneumatech assumes as well maintained compressor plant and reasonable operating conditions. Performance on mineral or mineral-based lubricants should be as above, irrespective of compressor type, condensate drain technology or climate,provided the condensate produced is not a stable emulsion.
- Excellent performance
2-stage filtration with advanced adsorption media
After separation, water contains oil levels below 15 ppm(1)
Emulsion treatment possible (on request) - Eliminating potential health issues
No standing or stagnant water - Plug-and-play installation and service
Connection points at inlet
Compact footprint
No pre-soaking required - Time-based service indicator and sampling kit (standard) to verify outlet concentration on a regular base.
- Extra 4 port kit